Biodegradable Hotel Key Card
Established in 2008, WS RFID has been producing RFID cards for over 15 years at a Shenzhen facility of over 10,000 sqm. Our Biodegradable hotel key card is CR80 standard (85.5 × 54mm) in thickness 0.8–1.0mm, and runs at 125kHz or 13.56MHz, supporting ISO/IEC 14443 and EM4100 protocols, read/write distance 5–15cm. Annual manufacturing capacity of more than 500 million units with a fault rate of less than 0.1% with a fully automated line.
A Biodegradable Hotel Key Card substitutes standard petroleum-based PVC cards with materials produced from organic, renewable and/or biodegradable sources — like polylactic acid (PLA) created from cornflour, FSC-certified wood, bamboo or recycled paper pulp.
Global plastic card manufacture is estimated at 10 billion pieces per year. For hotels facing regulatory pressure on single-use plastics and rising guest expectations around sustainability, adopting to a biodegradable access card is a practical way to reduce environmental impact.
The internal integrated RFID chip – NXP MIFARE, DESFire, NTAG or similar variants – is completely functioning. The guest receives the same dependable room access as before, but the card body is engineered to break down under industrial composting conditions, instead of hanging around as plastic garbage.
| Parameter | Details |
|---|---|
| Standard Size | CR80 (85.5 × 54mm) |
| Thickness | 0.8 – 1.0mm |
| Operating Frequency | 125kHz (LF) or 13.56MHz (HF) |
| Communication Protocol | EM4100, ISO/IEC 14443 |
| Read/Write Distance | 5 – 15cm |
| Storage Capacity | 1KB / 4KB / 8KB EEPROM |
| Data Retention | 10+ years; 100,000+ write cycles |
| Operating Temperature | -25°C to +70°C |
| Chip Options | NXP MIFARE series, DESFire, NTAG, ICODE, Hitag, Fudan Microelectronics, Huada Electronics |
| Printing Support | Offset, screen, digital printing; full-color CMYK |
| Material | PLA (cornstarch-derived), FSC-certified wood, bamboo, or recycled paper pulp |
The card body may be made from many biodegradable materials. PLAversions are made from cornflour and are meant for industrial composting facilities. Within the microbial activity and temperature conditions typical of commercial composting, the card body is able to decompose in about 180 days. The wood and bamboo versions have a natural look and are suitable for luxury or eco-resort decors. All varieties are coated with moisture-resistant polymers so the card won’t deteriorate from normal water contact during visitor usage.
The silicon chip and copper antenna can be recycled but not bio-degradable. They make up less than 1% of the bulk of the card. However, the biodegradable card body does still greatly decrease total plastic waste vs a 100% PVC card.
The cards are manufactured in conformity with RoHS and REACH. Batch testing to determine biodegradability confirms material composition and the lack of heavy metal contamination.

Each Biodegradable Hotel Key Card undergoes testing stages for biodegradable base materials that perform differently to normal PVC under stress and humidity. The completely automated manufacturing process ensures a failure rate below 0.1%.
The main quality control stages are:

Each card undergoes testing stages for biodegradable base materials that perform differently to normal PVC under stress and humidity. The completely automated manufacturing process ensures a failure rate below 0.1%.
The main quality control stages are:

WS RFID enables the whole process from design to delivery for card creation. Available choices are:
OEM and ODM collaboration are welcome. Functional samples in 7 working days. Existing samples are available on request and bespoke sample arrangements are negotiated. MOQ 500 pcs. Lead time is 5-7 days for in-stock goods and 10-12 days for made-to-order products.

Q1: Does this card function with my VingCard or Salto lock?
A: Yeah. The RFID chip within the card is programd to match your current lock hardware (MIFARE Ultralight, MIFARE 1K, T5577, etc.) and is what determines the operation of the card. Send us your system details and we’ll verify the correct chip configuration.
Q2: Will the card fall apart if a visitor gets it wet?
A: No, The card is also coated with moisture resistant polymers and will not be damaged by contact with water under normal circumstances. Degradation only happens in an industrial composting setting with the correct bacteria conditions and temperature.
Q3: What about print quality in wood or bamboo cards compared with plastic cards?
A: The natural grain of the wood may be combined with the sharpness of logos and text delivered by high resolution UV printing and laser engraving. Results vary by material and design complexity – we suggest acquiring a sample to assess against your branding needs.
Q4: How long do these cards last?
A: It has a 2–3 year shelf life, similar to standard PVC cards, kept in a cold, dry area. The data retention is rated for more than 10 years once the card is in active usage.
Q5: Are the RFID tags biodegradable?
A: No. The silicon chip and copper antenna are recyclable, but not biodegradable. They account for less than 1% of the overall mass of the card. The biodegradable card body still makes a big reduction in total plastic waste compared to a full PVC card.
Q6: Can we print our hotel logo and encode the cards before shipping?
A: Yes. WS RFID offers full-process services such as card design, logo printing, chip encoding, and packaging. You get factory ready to use cards.
Have questions about the Biodegradable Hotel Key Card or want to request a sample? contact us at kenny@w-srfid.com — we typically respond within one business day.