Paper Hotel Key Card
Hotels work on access cards, thus they are always changing out. WS RFID’s Paper hotel key card provides a recyclable alternative to PVC, without compromising on door lock functionality. Thickness is standard 0.5-0.8mm, and works at 13.56MHz, which is compliant with ISO/IEC 14443 and compatible with the majority of RFID lock systems. WS RFID has been producing RFID devices since 2008, with an annual output of more than 500 million and a fault rate of less than 0.1%.
Old plastic hotel cards are a disposal problem for the long term. The paper hotel key cards are made of recyclable materials that are RoHS- and REACH-compliant, so they cut down on waste but don’t change how the visitor uses the card. The 0.5-0.8mm profile is lighter than regular PVC, which helps save shipping weight on bulk purchases and make storage easier.
This card is paper-based, but does provide the amount of structure needed for insertion-style and tap-based RFID scanners. Sweat and humidity up to 90% are covered by a moisture-resistant top layer that protects the antenna and chip under usual visitor usage circumstances. This is a practical, low-disruption changeover from plastic that will work for hotels working toward ESG objectives or sustainable reporting.
| Parameter | Details |
|---|---|
| Standard Size | CR80 (85.5 × 54mm) |
| Thickness | 0.5–0.8mm |
| Operating Frequency | 13.56MHz (HF) |
| Communication Protocol | ISO/IEC 14443 |
| Read/Write Distance | 5–15cm |
| Storage Capacity | 1KB / 4KB / 8KB EEPROM (optional) |
| Data Retention | 10+ years |
| Write/Erase Cycles | 100,000+ |
| Operating Temperature | -25°C to +70°C |
| Material | Special paper (recyclable) |
| Printing Process | Offset, screen, digital printing; full-color CMYK |
| Chip Options | NXP MIFARE series, DESFire series, NTAG series, ICODE series, Hitag series, Fudan Microelectronics, Huada Electronics |
Recyclable Material
Printing Process Offset, screen, digital printing; full colour CMYK Chip Options NXP MIFARE series, DESFire series, NTAG series, ICODE series, Hitag series, Fudan Microelectronics, Huada Electronics Product Advantages Recyclable Material
The card is printed on a special paper, which is recyclable and fulfils international environmental standards RoHS and REACH. Moisture resistant layer protects internal antenna and chip from perspiration and humidity up to 90% (typical hotel usage circumstances).
Volume Cost Management
WS RFID is a production company with fully automated lines from a 10,000+ sqm facility. The per-unit cost is competitive at scale, and eliminating plastic cards from the waste stream may save disposal-related expense for high-volume businesses and event organisers.
Flexibility of Chips
Chip possibilities include NXP MIFARE Classic, DESFire EV2/EV3, NTAG, ICODE, Hitag and indigenous solutions from Fudan Microelectronics and Huada Electronics. This card is compatible with any lock system operating at 13.56MHz supporting ISO/IEC 14443 out of the box.
Securing Data
Every card is able to transmit data encrypted with anti-copying and anti-cloning security. The EEPROM data retention is better than 10 years, and the card is rated for 100,000+ write/erase cycles.
Print Quality
Offset, screen and digital printing methods provide full colour CMYK output on high density paper surfaces. For properties that desire a appearance, the matte finish provides a practical alternative to normal PVC printing.

Each paper hotel key card undergoes multi-step screening before being shipped:
The fault rate of WS RFID’s automated manufacturing lines is < 0.1%. The quality management system is accredited to ISO 9001:2015.


WS RFID is able to fully customise the procedure from artwork to completed delivery:

Q1: Is a product waterproof enough for daily use?
A: Not intended for long term immersion. The moisture-resistant coating is able to deal with perspiration, small splashes and humidity of up to 90% which covers common guest handling situations.
Q2: Does it work with my current RFID door lock system?
A: If your lock system is 13.56MHz and supports ISO/IEC 14443 then the card will work. This contains lock platforms from VingCard, Salto and Dormakaba among others.
Q3: How long is the card valid for a normal visitor stay?
A: The card is certified for 100,000+ write/erase cycles and is tested for bending and twisting by ISO 10373-1. Normal check-in and check-out use falls well within these restrictions.
Q4: Is the print quality same as PVC card?
A: Full colour CMYK output for offset and digital printing on high density paper. Matt surface finish is a practical alternative to traditional plastic card printing.
Q5: Is it more costly than plastic cards?
A: Per unit cost of manufacturing is competitive at volume. A net cost savings may be seen for properties that now pay to dispose of plastic cards.
Q6: Are there any certifications for this product?
A: The product fulfils the worldwide environment regulations such as RoHS, REACH and POPs. WS RFID quality management system is accredited to ISO 9001:2015.
Questions about our paper hotel key card or ready to request a sample? Reach us at kenny@w-srfid.com and we'll follow up promptly.