Wooden Hotel Door Key Card
The Wooden Hotel Door Key Card is a natural-wood RFID access card for hotel settings to replace single-use PVC plastic cards. Each card is CR80 size (85.5 × 54mm, 1.0–1.5mm thick), and works at either 125kHz or 13.56MHz. The cards are made from wood substrates such as bamboo, birch, maple or black walnut. It uses popular chip platforms and is compatible with widely used hotel lock systems, offering a realistic solution for hospitality organisations to decrease plastic waste without altering current infrastructure.
A wooden hotel door key card is an RFID enabled access card based on natural wood substrate. It uses the same chip and antenna as a standard PVC key card, but the outside material is wood, which is biodegradable and devoid of the toxic chemicals that PVC emits at the end of its life.
There is a genuine operational problem that the card solves for hotels: traditional PVC guest cards are not biodegradable and contribute massively to landfill trash. The wood substrate provides a natural grain texture and premium tactile feel to correspond with the positioning of luxury, boutique and eco-conscious hotel businesses.
| Parameter | Details |
|---|---|
| Standard Size | CR80 (85.5 × 54mm) |
| Thickness | 1.0–1.5mm |
| Operating Frequency | 125kHz (LF) or 13.56MHz (HF) |
| Communication Protocol | EM4100, ISO/IEC 14443A, ISO 15693 |
| Read/Write Distance | 5–15cm |
| Storage Capacity | 1KB / 4KB / 8KB EEPROM optional |
| Data Retention | 10+ years; 100,000+ write/erase cycles |
| Operating Temperature | -25°C to +70°C |
| Material | Natural wood (bamboo, birch, maple, black walnut) |
| Printing Process | Offset, screen, digital (full-color CMYK) |
| Chip Options | NXP Mifare Classic, Mifare DESFire, Ntag series, ICODE, Hitag, Fudan, Huada |
It is made from natural wood which is biodegradable and recyclable. Wood does not give out harmful substances when it is disposed of, unlike PVC.
Each card is vacuum dried and sealed to keep the moisture at 8-12%. This is especially true in humid coastal or resort regions where dimensional stability is a genuine concern (no warping or breaking).
The surface has a UV or matte protective coating to protect against moisture while keeping the natural grain finish. The wood substrate is 100% biodegradable, the implanted RFID chip and antenna are detachable for electrical recycling at end of life.

The cards are compatible with major chip platforms, including NXP Mifare Classic, Mifare DESFire, Ntag series, ICODE and Hitag, as well as alternatives from Fudan Microelectronics and Huada Electronics. This broad variety of chip support enables the card to be designed to operate with hotel lock systems such as VingCard, Salto and Onity, among others.
The card supports ISO/IEC 14443A and ISO 15693 protocols, with a read/write range of 5-15cm. Encrypted data transfer helps to secure each card from being copied and cloned – an important factor for high-security hotel areas, VIP floors and corporate event access.
The thermal stability of natural wood construction was better than that of PVC. This is important for resorts, spas and outdoor-facing entry points, since it will not melt or distort at high ambient temperatures.

Wooden Hotel Door Key Cards are used in a number of hospitality and access control applications.

WS RFID offers comprehensive process services from card design to final delivery. The brand logo may be printed using offset, screen or digital printing in full CMYK colour. Laser engraving also creates a natural surface finish.
Each card is programmable by chip and data initialisation before shipping. We can also do custom sizes (not only CR80) as well as customised function cards that may be produced per project need.
OEM & ODM collaboration is welcomed. They may aid in integrating into current access control or management systems and give remote technical assistance throughout the project.
Before distribution, every products go through a rigorous inspection:
The manufacturing line produces with a fault rate of less than 0.1%, backed by completely automated inspection systems.

Q1: Is the wooden key card compatible with my current hotel lock system?
A: The WS RFID sets the internal chip, including NXP, Fudan and other supported alternatives to meet your lock platform needs. The ordering process will check for compatibility with systems such as VingCard, Salto and Onity.
Q2: Will the wood warp or fracture in high humidity climates?
A: All cards are vacuum dried, sealed and tested for industry standard humidity before distribution. The moisture content is maintained at 8 to 12 percent to provide dimensional stability in humid conditions.
Q3: Can I print full colour logo on a wooden card?
A: Yes. UV printing can reproduce in full CMYK colour at high resolution. We also have the ability to laser engrave for a more natural surface finish.
Q4: How does the life of a wooden card compare with PVC?
A: The card is tested to a 50,000 flex-cycle standard, a benchmark that accommodates average visitor stays under regular usage circumstances.
Q5: Can the wood substrate be composted?
A: The wood substrate is fully (100%) biodegradable. Ideally from an environmental perspective the RFID chip and antenna would be separated for electronic recycling.
Q6. What is the minimum order quantity and delivery time?
A: The MOQ is 500pcs. In-stock items ship in 5-7 days. Custom or out of stock items take 10-12 days. Free samples available for in stock goods.
Do you have more questions about Wooden Hotel Door Key Card? For samples, pricing, or custom project inquiries, contact the WS RFID team at kenny@w-srfid.com.