UHF Ceramic Tag
UHF Ceramic Tag technology presents a solution to a challenge that regular plastic RFID labels cannot solve: accurate recognition on metal surfaces and during continued high heat. The passive ceramic transponder used in WSRFID works at 860-960 MHz in accordance with ISO 18000-6C / EPC Gen2, has a reading distance of 2-10 meters on direct metal mounting and withstands continuous temperatures from -40°C to +250°C. The antenna is compressed using a ceramic substrate to a footprint as tiny as 3×3 mm without loss of signal stability. Complies with RoHS & REACH.
It is a passive RFID transponder on a ceramic substrate in place of the traditional plastic or paper. The ceramic material has naturally high dielectric constant so that the antenna may be miniaturised without loss of RF performance.
This feature makes it the practical option for three particular situations: restricted physical space, high exposure to temperature and direct attachment on metallic surfaces. These tags are meant to be physically attached to steel or aluminium, and unlike general purpose RFID labels, they provide constant read performance.
| Parameter | Specification |
|---|---|
| Operating Frequency | UHF 860–960 MHz |
| Communication Protocol | ISO 18000-6C, EPC Gen2 |
| Read Distance | 2–10 meters |
| EPC Storage Capacity | 128-bit / 512-bit (optional) |
| Substrate Material | Ceramic |
| Operating Temperature | -40°C to +250°C |
| Size Range | 3×3 mm to 20×20 mm |
| Mounting Method | Soldering or high-temperature adhesive bonding |
| Waterproof Rating | IP68 |
| Supported Chips | Impinj Monza, Alien Higgs, NXP UCODE |
| Certifications | RoHS, REACH |

Most RFID UHF Ceramic Tag will disintegrate under heat, chemicals and direct contact with metal. All three are handled by a ceramic substrate.
The high dielectric constant enables a tiny antenna design while yet having good RF output, which is how the tag may be as small as 3×3 mm, a size that traditional plastic tags cannot match without sacrificing performance.
Ceramic absorbs very little moisture too, which also contributes to the IP68 classification for long term outdoor and industrial usage. Dimensional consistency, from precise ceramic manufacturing, is important for soldering or bonding big quantities on a production line.

Standard RFID tags often don’t work beyond 85 °C. WS RFID’s ceramic RFID tags are specified for continuous operation from -40°C to +250°C and hence are suitable for the whole spectrum of most industrial heat treatment operations.
Tags are added to metal pieces before being placed in an industrial oven, monitored through welding shops or connected to components in engine production facilities. Repeated temperature cycling maintains data integrity and RF performance
Practical uses include ceramic product sintering lines, high temperature soldering in the electronics manufacturing industry, and automobile component identification, where heat exposure is inevitable.

Radio waves are reflected and absorbed by metal surfaces. Directly on steel or aluminium, standard tags decrease read range or fail altogether. This is called signal detuning.
The antenna shape of the ceramic tag is meant to counteract this. The substrate's high dielectric constant acts as a physical buffer between the antenna and the metal surface, allowing for stable antenna resonance and achieving read distances of 2-10 meters even when mounted directly on metal.
This is applicable for engine parts, steel tools, aluminium heat sinks and any conductive surface where asset tracking is necessary.
These tags are suitable for industrial situations with demanding identifying requirements:
The UHF Ceramic Tag is designed to withstand all these situations without needing extra protective housings.

The following aspects of customisation (of ceramic RFID tags) are supported by WS RFID:
MOQ is from 500 pcs. Lead time in stock: 5-7 days Lead time out of stock: 10-12 days Some of the free existing samples are accessible.
WS RFID also offers software SDKs and remote integration help to link tags to existing inventory or asset tracking systems.
Q. Can this tag be directly attached to metal surfaces?
A: Yes. The ceramic substrate is used as a dielectric spacer between the antenna and the metal surface to maintain antenna tuning and a 2-10 meter read range, which would collapse with a normal tag.
Q: What is the temperature range?
A: The tag is rated for continuous operation from -40°C to +250°C, encompassing industrial oven procedures, welding conditions and engine component monitoring.
Q: What chips do you have?
A: WS RFID supports Impinj Monza, Alien Higgs, NXP UCODE and other compatible chips. Selection depends on your reader infrastructure and the desired EPC storage capacity (128-bit or 512-bit).
Q: What are your mounting options?
A: Soldering for permanent incorporation on the production line. High temperature adhesive bonding to adhere it to a surface. Both are ideal for high temperature applications.
Q: Are these tags compatible with normal UHF readers?
A: Yes. It is ISO 18000-6C and EPC Gen2 compliant and will work with any standard UHF scanner operating in the 860-960 MHz band.
Do you have more questions about UHF Ceramic Tag? Send your application requirements or sample requests to kenny@w-srfid.com.