Plastic Hotel Key Card
The lock mechanism must to operate when a visitor loses a key or checks out late. WS RFID’s Plastic hotel key card is an ISO/IEC 7810 CR80 access credential intended for just that kind of everyday demand. Made from sturdy PVC or PET, it supports 125kHz LF and 13.56MHz HF frequencies with chip choices ranging from MIFARE Classic to DESFire EV3. WS RFID is ISO 9001:2015 certified and all cards comply with RoHS and REACH environmental regulations.
A plastic hotel key card substitutes metal keys with a small, re-encodable RFID or magnetic stripe credential the size of the CR80 standard (85.5 x 54mm) that fits in all standard card readers or encoders .
There are three practical reasons why hotels prefer RFID cards over physical keys: they remove the security gap of duplicated keys or keys not returned, they provide an auditable record of access per guest stay, and they can be re-encoded at the front desk without hardware change.
WS RFID cards have encrypted data transfer and anti-cloning capabilities based on the chip's sector authentication architecture, meaning an unauthorised reader cannot quietly duplicate a card's credential data.
| Parameter | Details |
|---|---|
| Standard Size | CR80 — 85.5 × 54mm |
| Thickness | 0.76 – 0.84mm |
| Operating Frequency | 125kHz (LF) or 13.56MHz (HF) |
| Communication Protocol | EM4100, ISO/IEC 14443 |
| Read/Write Distance | 5 – 15cm |
| Storage Capacity | 1KB / 4KB / 8KB EEPROM |
| Data Retention | 10+ years |
| Write/Erase Cycles | 100,000+ |
| Operating Temperature | -25°C to +70°C |
| Material | PVC / PET |
| Printing Process | Offset, screen, digital printing; full-color CMYK |
| Chip Options | NXP MIFARE, DESFire, NTAG, ICODE, HITAG, Fudan, Huada |
Hotel-Specific Frequency Support
The 125kHz LF option is reliable in areas with a lot of electrical equipment. The 13.56MHz HF option is compatible with major electronic lock brands and uses ISO/IEC 14443A protocols, providing the chip protocol and encryption keys match the lock system’s firmware setup.
PVC & PET Material Options
PVC is the most common option for most hotel installations. It is cost economical, broadly compatible and consistent under typical operating circumstances. PET cores have a greater melting point and flex resistance making them a fair choice for properties in high humidity coastal or high temperature resort locations where card bending has been documented.
Chips: Where to Store Them
Storage sizes vary from 1KB to 8KB EEPROM for applications that require to store various sets of data on one card, such as cashless payment balances, floor-level access levels, or loyalty program identities.
Custom Full Colour Print
Cards are printed using full colour CMYK offset, screen or digital process. Surface Finish Options include gloss, frosted or matte finish. We use an X-Rite spectrophotometer to measure the Pantone colours to ensure colour consistency from batch to batch.

Hotel access control is the primary use case, but the same card infrastructure often covers other touchpoints across a property:
For properties managing multi-zone access — such as combined hotel and conference complexes — the plastic hotel key card can carry segmented access permissions per zone, with each permission tied to encrypted sector keys that prevent unauthorized re-use after check-out.

WS RFID operates an automated production line with testing protocols referenced to international standards:

WS RFID handles the full production sequence from chip selection to finished card delivery.
Available customization options:
MOQ starts at 500 units. Functional samples can be developed within 7 working days. Stock samples are available at no charge; terms for out-of-stock samples can be discussed directly.

Q1 : What causes my hotel key card to fail while close to a phone ?
A: This is a recognised problem with Low-Coercivity (LoCo) magnetic stripe cards. The demagnetisation hazard of mobile device magnets is eliminated with a High-Coercivity (HiCo) stripe at 2750 Oe or a 13.56MHz RFID chip.
Q2: Is it possible to customise cards with changing guest data?
A: Yes. WS RFID allows thermal transfer and inkjet printing for sequential numbering, QR codes and guest names, whether applied at time of manufacture or during the check-in encoding stage.
Q3: Do these cards work with locks such as VingCard or Saflok?
A: Compatibility will rely on the chip protocol (MIFARE Ultralight, MIFARE 1K, etc.) and encryption keys being compatible with the firmware of the particular lock system. If you can supply WS RFID with the specifications of the protocol your lock system uses, the chips may be configured to meet your needs.
Q4: How do I decide between PVC and PET?
A: PVC works well in most hotel situations. PET is certainly a candidate to consider for high-temperature climes, coastal residences or high-cycle resort situations where the greater melting point and flex durability provide a realistic service life benefit.
Q5: How long is the lead time for a large order?
A: In-stock goods ship in 5-7 days. Custom-printed orders are normally 10-12 business days including post-print curing & QC testing.
Q6: What certifications do these cards have?
A: WS RFID is ISO 9001:2015 Certified. The cards are CE, FCC, RoHS and REACH compliant and meet the worldwide standard criteria for hospitality and purchase.
Do you have more questions about Plastic Hotel Key Card? To request a sample or discuss an order, email kenny@w-srfid.com.