NFC Payment Card
WS RFID’s NFC Payment Card technology works at 13.56MHz, and is ISO/IEC 14443 and EMV payment standards compliant. Each card has a secure element with DES/3DES/AES encryption and a Common Criteria EAL4+ security certification. These cards are made to CR80 dimensions (85.5×54mm) in PVC, PET, PC or ABS and are used by banks, government organisations, transport operators and business customers. MOQ begins at 500 pcs.
Our product is a contactless smart card that utilises Near Field Communication to do financial transactions at an 0-4cm distance - no swiping or insertion necessary.
It integrates an integrated security element (SE) with an RF antenna that transmits to POS terminals at 13.56 MHz. EMV dynamic data authentication creates a new cryptogram for each transaction , so you can ’ t use the same code again . This eliminates the cloning danger of magnetic stripe cards and the mechanical wear of contact based interfaces.
| Parameter | Details |
|---|---|
| Standard Size | CR80 (85.5 × 54mm) |
| Thickness | 0.76 – 0.84mm |
| Operating Frequency | 13.56MHz (HF) |
| Communication Protocol | ISO/IEC 14443, EMV Payment Standard |
| Read/Write Distance | 0 – 4cm |
| Storage Capacity | 1KB / 4KB / 8KB / 72KB EEPROM |
| Security Rating | Common Criteria EAL4+ |
| Data Retention | 10+ years; 100,000+ write/erase cycles |
| Operating Temperature | -25°C to +70°C |
| Card Materials | PVC, PET, PC, ABS |
| Chip Options | NXP SmartMX, Infineon SLE, Huada Electronics |
| Encryption | DES / 3DES / AES |
WS RFID’s product is protected on many levels – chip level, protocol level and data level.
Storing data is protected against unauthorised access and cloning attempts using encryption techniques such as DES/3DES/AES. Besides that this EMV dynamic data authentication (DDA) creates a cryptogram for each transaction. Even if transaction data is intercepted, it cannot be used again in the future – a definite upgrade over magnetic stripe cards.
The chip is Common Criteria EAL4+ rated to suit the security needs of the financial sector. Cards are also RoHS and REACH compliant.

The cards are manufactured from PVC, PET, PC or ABS and are thickness regulated to 0.76mm ~ 0.84mm (ISO/IEC 7810 ID-1).
Each card is tested mechanically for torsion and bending according to ISO/IEC 10373-1 to make sure the internal antenna and chip connections will not be damaged by the stresses of regular usage. Cards are also tested for perspiration, grease, temperature variations from -25°C to +70°C. > 10 years data retention > 100,000 write/erase cycles

Our products are used in many businesses and payment settings.
Mobile and Retail Payments
Good for shopping centers, supermarkets, convenience shops. Tap and Go transactions are quick and decrease waiting in high volume micro payment situations and remove contact slot maintenance.
Transport
Supports electronic ticketing for buses, subways and taxis. Open loop transport systems may take use of the speed of the NFC Payment Card’s contactless experience to maintain passenger throughput at turnstiles high.
Campus & Corporate Usage
Covers cafeteria payments, library access, employee meal cards, corporate expenditure management. Multi-application cards may incorporate EMV payment, physical access control and logical login on the same card.
Public Sector & Healthcare
It supports social security cards, medical payments and distribution of employee welfare. EAL4+ chip architecture satisfies government-grade security standards.
Tourism & Cross-Border
Handles scenic location tickets, lodging purchases, and enables multi-currency cross-border transaction settlement.

WS RFID supports full customization from chip selection through card printing to system integration.
MOQ is 500 units, making the service practical for small-batch projects. Functional samples are available within 7 working days. Production is based at WS RFID's Shenzhen facility.

WS RFID's QC follows ISO/IEC 10373 testing protocols across four areas:
Q1 How does a product avoid data skimming?
A: Every transaction employs EMV dynamic data authentication (DDA) to create a one-time cryptogram. The intercepted data cannot be reused, therefore the skimming attempts are useless.
Q2: What is the life of the internal antenna?
A: ISO/IEC 10373-1 mechanical test standard for the product with over 100,000 tap cycles.
Q3: Which international payment networks can I use the card with?
A: Cards are manufactured to EMVCo Level 1 (analogue and digital) and Level 2 (software kernel) requirements so that they may interoperate with payment terminals globally.
Q4: What are "card read errors" at the terminals?
A: Common reasons include antenna detuning due to physical damage or interference caused by nearby RFID cards. WS RFID’s QC incorporates a verification of the resonance frequency to mitigate this risk.
Q5: What customisation choices are open to us?
A: WS RFID can provide brand logo printing, custom chip encoding, Java Card applet creation and system integration — MOQ 500 units.
Q6. What industries do you serve?
A: WS RFID sells products to banks, transport operators, government agencies, campus networks and corporate customers in the US, Canada, Europe and Australia.
Do you have more questions about NFC Payment Card? Email kenny@w-srfid.com for samples, pricing, or custom order inquiries. We respond to all business inquiries promptly.