Embedded RFID Tag
Selecting the appropriate identification solution for challenging manufacturing conditions is not only about selecting a label – it’s about ensuring that the tag lasts as long as the product. An embedded RFID tag is permanently inserted into a product’s substrate during manufacture. The substrate might be plastic, wood, metal or composite. This approach prevents physical tampering, surface deterioration, and tag loss that surface-mount labels cannot avoid. WS RFID is available in HF and UHF frequencies, with specific form factor, chip model and environmental resistance.
Our product is a transponder that is embedded in a product’s housing or substrate during the manufacturing process. Once implanted, it cannot be extracted without destroying the host object, hence preserving the integrity of the digital identity during the product's complete service life.
This technique solves certain problems that adhesive or surface-mount tags cannot: tag loss under mechanical stress, tag removal without permission, and signal deterioration from chemical cleaning or heat cycling. The tag is not an attachment, it is part of the component.
The tags support HF (13.56 MHz) and UHF (860–960 MHz) frequency bands and communication protocols including ISO/IEC 14443 and EPC Gen2.
| Parameter | Specification |
|---|---|
| Operating Frequency | HF 13.56 MHz / UHF 860–960 MHz |
| Communication Protocol | ISO/IEC 14443 / EPC Gen2 |
| Reading Distance | 0–10 cm (HF) / 0.5–3 m (UHF) |
| Storage Capacity | 96-bit / 128-bit / 512-bit EPC; user area optional |
| Operating Temperature | -40°C to +85°C; high-temperature models up to +250°C |
| Protection Rating | IP54 / IP65 / IP67 / IP68 (optional) |
| Chip Models | Impinj Monza, Alien Higgs, NXP UCODE |
| Mounting Methods | Screw fixing, riveting, welding, direct mold embedding |
| Size | Custom sizes available per application |
| Materials | Customized per application |
| MOQ | 500 units |
| Lead Time | 5–7 days (in-stock) / 10–12 days (custom orders) |
Encapsulation for Harsh Environments
The encapsulating materials (FR4, epoxy resin, PEEK or PPS) protect the structure from temperature cycling, high pressure autoclaving and corrosive chemicals. Tags rated IP68 are completely sealed against prolonged water immersion and are ideal for washdown and subsea applications.
Tune for the Host Material
When a tag is put in wood or plastic the resonance frequency changes. This is because to dielectric loading. The embedded RFID tags with WS RFID are pre-tuned to compensate for the dielectric characteristics of the host material, and the read performance after embedding still falls within the prescribed range rather than decreasing unexpectedly.
On-Metal Setup
WS RFID provides on-metal tag designs for components that are built out of or installed within metal, using the metal cavity as a reflector or antenna extension. This allows UHF read performance to be constant even in settings where normal tags would not work at all.
Batch Reading for Automated Lines
UHF versions offer batch reading (0.5 to 3 m) directly with tunnel readers and conveyor-based scanning stations. These tags are suitable with MES, ERP and WMS connectivity.
Production Quality
Each manufacturing batch conducts sensitivity testing (TIE), thermal cycling checks, pressure and vacuum tests and read range consistency verification using high speed tunnel readers. The rate of manufacturing defects is kept below 0.3 %. WS RFID is ISO 9001:2015 certified and the products are CE, FCC, RoHS and REACH compliant when appropriate.

Industries where permanent and tamper-resistant identification is not just desired but must utilise embedded RFID tags:
The tags are also compliant with Digital Product Passport (DPP) regulations, which can be of interest to firms planning for product compliance requirements in the EU.

WS RFID allows for product-specific customisations at the hardware and system levels:
Functional prototypes are often available in 7 working days. Existing stock samples are available free.

Our products have to be tested more thoroughly than surface-mount labels, as the embedding procedure might have an effect on tag performance. At WS RFID, each tag goes through the following steps before shipping:

Q1: What is the effect of the embedding material on the read range?
A: Resonant frequency of a tag is shifted by dielectric loading of wood and plastic. The compensation is done by the WS RFID in the pre-tuning step, such that the provided read range is the performance after the embedding, instead of the free-air testing environment.
Q2: Can these tags function within metal parts?
A: Yeah. The on-metal config use the metal cavity as a reflector or antenna extension to sustain UHF read performance when within or on metallic parts.
Q3: Are the products readable by normal readers?
A: EPC Gen2 or ISO/IEC 14443 protocol-compliant tags will function with any off-the-shelf RFID reader. No proprietary hardware needed.
Q4: What choices are there for data security?
A: Tags may be programd with permanent memory locks, kill commands or AES-128 encryption. The settings here prohibit access to data and cloning attempts of tags.
Q5: What are the customisation options and minimum order?
A: WS RFID allows size, chip model, mounting technique and environment settings. Minimum order quantity is 500 units, lead times are 5 - 7 days for in-stock configurations and 10 - 12 days for bespoke orders.
To discuss specifications or request samples for your embedded RFID tag project, reach the WS RFID team at kenny@w-srfid.com.