image

RFID PCB Tags

• Product Type: PCB circuit board RFID tags, designed specifically for industrial intelligent applications.
• Chip Technology: Utilizes industrial-grade chip solutions, operating frequency UHF 860-960MHz.
• Communication Protocol: Supports EPC Gen2, directly soldered onto the PCB, becoming an integral part of the product.
• Environmental Adaptability: High temperature resistant up to 260°C, adaptable to SMT production processes, meeting industrial application requirements. • DPP-Compatible RFID tags
• Materials and Processes: FR4 PCB material, high-temperature reflow resistant, industrial-grade durable design.
• Customization Services: Supports customized sizes, installation methods, and environmental adaptability.
• Company Advantages: WS RFID provides industrial solutions from tag design to system integration.
• Quality Certifications: Certified with industrial-grade standards, RoHS, REACH, IP protection rating, etc.
• Lead Time: 5-7 days for in-stock products; 10-12 days for products not in stock.
• Application Value: Enables production automation, improves production efficiency, and reduces operating costs.
Product Description

RFID PCB Tags for Industrial Applications — Built for Metal, Heat, and Harsh Environments

RFID PCB Tags are identifying devices made on the FR4 printed circuit board material with a copper etched antenna and chip directly embedded on the substrate. Unlike flexible labels, they solve the issue of metal interference by employing the PCB material as a dielectric buffer, which allows robust UHF communication at 860-960 MHz even when attached directly to metal surfaces. WS RFID is an RFID hardware manufacturer since 2008 with facilities of 10,000 sqm and stated failure rate of less than 0.3%.

What Are RFID PCB Tags and How Do They Work?

Normal RFID labels don’t function on metal because the metal surface reflects and absorbs RF signals. This is resolved by products that use a stiff FR4 substrate as a dielectric spacer between the antenna and the metal surface. This enables the antenna to properly resonate and interact with a UHF scanner without the deterioration of the signal that flexible label designs are subject to.

The chip and antenna are etched directly into the PCB so the tag becomes a permanent part of the asset it is linked to. This construction also offers good dimensional stability which is important for SMT integration and mechanical mounting applications.

Key Technical Specifications

Parameter Specification
Operating Frequency UHF 860–960 MHz
Communication Protocol EPC Gen2 (ISO 18000-6C)
Read Distance 0.5–3 meters
Storage Capacity 96bit / 128bit / 512bit EPC; user area optional
Operating Temperature -40°C to +85°C (high-temp models up to +250°C)
Protection Rating IP54 / IP65 / IP67 / IP68 optional
Material FR4 PCB, high-temperature reflow resistant
Moisture Absorption < 0.1%
Mounting Methods Screw fixing, riveting, soldering, embedded
Chip Options Impinj Monza, Alien Higgs, NXP UCODE
MOQ 500 units
Lead Time 5–7 days (in stock); 10–12 days (out of stock)

Performance in Industrial Environments

Temperature resistant. High temperature versions rated to +250°C, suitable with SMT reflow soldering techniques. The tags may be applied using pick-and-place devices and passed through a reflow oven without destroying the chip or antenna.

Reading on metal. The FR4 substrate provides the dielectric buffer for reliable RF transmission on steel, aluminium and other metals. Tags are factory adjusted for wide compatibility with metals to provide consistent performance across metal grades.

Mechanical durability. The sturdy PCB construction is vibration tested to MIL-STD-810G. “SMT-integrated tags are tested for shear and pull strength so the bond will hold up under long-term mechanical stress.

Consistency of reads. Automated testing ensures the read range is the same for every production batch. The Vector Network Analyser (VNA) test shows that the tag resonance remains at the intended frequency when placed on different surfaces.

application

Industrial Applications

RFID PCB Tags are developed for use in applications where flexible labels are not suitable. Typical deployment possibilities are described below.

Electronics, PCBA Manufacturing PCBs are soldered directly on tags for manufacturing traceability and lifespan data management. They integrate with MES, ERP, and WMS systems.

Vehicle Electronics. Applied to oecus, sensors and controllers along the supply chain. IP67/IP68 rated models may be cleaned down and exposed to fluids on the factory floor.

Industrial Mould & Tool Administration Tags installed on strong metal moulds can endure the impact of stamping and heat produced during injection moulding procedures.

Medical devices. Tags placed in surgical tools or diagnostic equipment can withstand numerous autoclave sterilisation cycles at 134°C under high-pressure steam.

IT Asset & Server Tracking. Real-time inventory monitoring of server blades and networking devices in metallic chassis systems is supported by compact form factors.

MILITARY & AEROSPACE Used in radar, communication and navigation equipment that requires long-term tracking under harsh circumstances.

Communications Equipment. Embedded RFID identification provides permanent identification for base stations, routers and switches allowing automated inventory management.

equipment

Quality Control

WS RFID applies five standard inspection points to every production batch:

  1. Read Range Consistency — Verified with automated testing equipment to confirm gain uniformity across batches.
  2. Thermal Cycling — Rapid temperature cycling detects FR4 delamination before tags leave the facility.
  3. Chemical Resistance — Tags are tested against industrial solvents, oils, and acids to confirm substrate and chip encapsulation integrity.
  4. Shear and Pull Strength — Mechanical bond to the parent PCB is tested for SMT-integrated tags.
  5. Frequency Deviation Analysis — VNA testing confirms resonance accuracy when mounted on different metal grades.

WS RFID reports a production defect rate below 0.3% across its manufacturing output.

Customization and System Integration

WS RFID supports full customization of RFID PCB Tags for high-temperature, high-pressure, and chemically corrosive environments. Available options include size, mounting method, chip model, memory configuration, and protection rating. Antenna redesign is supported for non-standard dimensions. Functional samples are available within 7 working days of order confirmation.

Beyond the tag itself, WS RFID provides reader/writer solutions matched to specific production lines, along with software SDK and remote technical support for system-level deployment.

Service Process

Certifications and Compliance

Products are manufactured under ISO 9001:2015 quality management. Available certifications include CE, FCC, RoHS, REACH, and POPs. Protection ratings from IP54 to IP68 are available depending on application requirements.

certificate

FAQ

Q1: Why choose the products over flexible on-metal labels?

A: PCB tags offer greater mechanical durability and a wider operating temperature range. They are suited for permanent attachment over an industrial product lifecycle where flexible labels would degrade or detach.

Q2: Can these tags be customized in size?

A: Yes. The antenna can be redesigned for specific dimensions using standard PCB manufacturing processes. Smaller sizes generally result in shorter read ranges. MOQ is 500 units.

Q3: Are these tags compatible with SMT production processes?

A: Yes. Tags designed with solder pads and high-temperature resins can be placed via pick-and-place machines and passed through a reflow oven up to 260°C.

Q4: How does the mounting surface affect reading performance?

A: The type of metal — such as steel versus aluminum — can slightly shift the resonance frequency. WS RFID tags are pre-tuned for broad metal compatibility to reduce this effect across common industrial substrates.

Q5: What systems can the products integrate with?

A: They support integration with MES, ERP, and WMS systems. WS RFID also provides software SDK and remote technical support to assist with deployment. contact us to confirm compatibility with your specific environment.

Contact Us

Do you have more questions about RFID PCB Tags? Send your application requirements or sample requests to kenny@w-srfid.com.

Drop Us A Line
RFID smart cards, wristbands, and electronic tags for identification, access control, and tracking applications. Contact us with your application, reader details, quantity, and customization requirements to discuss product options and sample availability.
Welcome to contact us anytime for more products contact us