RFID ABS Tags
Standard paper labels and film tags can’t always stand up to mechanical stress, moisture or temperature changes, so industrial operations require something tougher. Since 2008 WS RFID produces hard-shell transponders, operates a facility of more than 10,000 sqm and has an annual production of over 500 million units. Our RFID ABS Tags are manufactured from Acrylonitrile Butadiene Styrene engineering plastic and support LF (125kHz), HF (13.56MHz), and UHF (860–960MHz) frequencies with IP67 sealing and a working range of -40°C to +85°C.
Traditional RFID labels are sensitive to crushing, peeling and moisture damage in industrial conditions. RFID ABS Tags are designed to overcome these problems, by enclosing the chip and antenna in a strong ABS polymer housing that is resistant to mechanical impact, vibration, dust and water penetration.
The placement of the material effects the reliability of the system for applications that demand frequent data collection for inventory or asset management. When a tag stops reading after a month of forklift action or a wash-down cycle, it’s more than an annoyance, it breaks the data chain your systems depend on.
| Parameter | Details |
|---|---|
| Operating Frequency | LF 125kHz / HF 13.56MHz / UHF 860–960MHz |
| Communication Protocol | ISO/IEC 14443 / 15693 / EPC Gen2 |
| Chip Options | NXP, TI, Impinj (selectable) |
| Reading Distance | 0.5–10 meters (varies by frequency band) |
| Material | ABS engineering plastic |
| Protection Rating | IP67 |
| Operating Temperature | -40°C to +85°C |
| Mounting Method | Screw fixing or adhesive backing |
| Size | Multiple sizes available; customization supported |
| Color | Standard black; custom colors supported |
| Certifications | RoHS, REACH |
Impact and Vibration Resistance
Shock and Vibration Resistance Certified RoHS, REACH Core Features and Technical Benefits
ABS housing withstands considerable mechanical pressure. Forklift traffic and automated sorting equipment are no match for the housing, according to drop and impact testing.
IP67 Dust and Waterproof
The enclosure is ultrasonic welded or bonded and leak tested by immersion and vacuum. Tags will operate when exposed to rain, wash-down cycles or 1 metre of water for 30 minutes.
Extended temperature range
These tags can operate from -40°C to +85°C. Accelerated ageing trials demonstrate that ABS does not distort or become brittle when exposed to continuous heat stresses for outdoor deployments and cold chain applications.
Multiple Band Support
LF, HF or UHF is a question of your read-range needs, reader infrastructure and application. UHF variants are EPC Gen2 ready and can count inventory at a distance of up to 10 meters.
Reader compatible
All tags are compatible with ISO/IEC 14443, 15693 and EPC Gen2 RFID readers. No setup middleware needed for normal setups.

Returnable Transport Items (RTIs)
These tags are used to trace plastic pallets, crates and containers in logistics networks. The sturdy housing withstands frequent forklift hits and automatic sorter contact that would destroy a regular label in days.
Industrial Tool and Mould Control
In the production facility, high-value tools and moulds are fitted with hard tags. They are not subject to interruption by the constant exposure to cutting fluids, grease and vibration in which they are used, nor to the demands of the automated maintenance schedule and inventory records that they maintain.
Warehouse Inventory Counting and Shelf Labelling
RFID ABS Tags are attached to shelving units or storage bins to enable precise stock counting and the reduction of the labour cost of manual scanning cycles.
Uses of waste and outdoor management
They’re mounted to exterior trash cans or public infrastructure and can survive UV radiation, rain and the high-vibration environment of trash trucks. ABS compounds with UV resistance for longer outdoor life
Metal Surface Deployment
The on-metal versions have an embedded ferrite layer that eliminates interference of signals from metallic surfaces and are appropriate for tracking of metal equipment and machinery and automobile parts.

All manufacturing batches at WS RFID are subjected to a multi-stage quality control procedure and produced to ISO 9001:2015 standards and are RoHS and REACH certified for environmental compliance.

Standard catalogue products are not necessarily compatible with all mounting surfaces, protocol or branding requirements. WS RFID offers the following customisation options:
Functional prototypes are normally available within 7 working days. Lead time is 5-7 days for in-stock goods and 10-12 days for bespoke manufacturing runs. MOQ 500 pcs and above. Samples already accessible at no cost.

Q1: Can the products be applied on metal directly?
A: Standard versions can't – metal reflects RF waves and messes up read performance. There are on-metal variants with integrated ferrite anti-interference layer that perform reliably on metallic equipment and machinery.
Q2: How long will these tags last outdoors?
A: UV resistant ABS plastic tags are normally rated for 7 to 10 years use outdoors. Thermal stability tests show no warping or brittleness over the -40°C to +85°C operational range.
Q3: How are the tags installed?
A: It has screw holes for permanent mechanical fixing, heavy-duty 3M adhesive backing and cable tie slots for mounting – allowing you flexibility depending on the surface you’re attaching to and whether you need to be able to remove the mount later.
Q4: Do the colour of housing impact the RFID performance?
A: No. Colour is for visual identification only, and has no influence on RF signal performance. For outdoor application, the carbon black pigments may give somewhat improved UV resistance.
Q5: Are the tags truly waterproof?
A: Yes. With an IP67 classification, they are completely protected from dust ingress and can survive immersion in up to 1 metre of water for 30 minutes, making them ideal for wash-down situations and outdoor usage.
Q6: What brands of chips are there?
A: Selectable settings for all NXP, TI and Impinj chips are supported. The choice of chip will determine the memory capacity, protocol compatibility and read sensitivity, therefore the proper decision relies on your reader infrastructure and data needs.
Do you have more questions about RFID ABS Tags? Send your project details, sample requests, or technical questions to kenny@w-srfid.com.