RFID Anti Metal Tags
Standard RFID tags quickly become useless whenever they hit a conductive surface, which is often the case when tracking metal items automatically. WS RFID’s RFID Anti Metal Tags are designed to meet this problem, including an integrated electromagnetic isolation layer that protects the antenna from high-conductivity materials such as steel, aluminium and more. The tags work at UHF 860-960MHz with EPC Gen2 protocol and provide reliable identification in challenging situations for logistics, manufacturing and industrial asset management.
RF radiation is reflected by metal surfaces and creates eddy currents that may detune the antenna of a conventional tag and eliminate the signal altogether. Metal tags and RFID solve this by adding an integrated isolation layer – usually a ferrite or high-dielectric spacer – that creates the required stand-off distance between the antenna and the metal surface. This provides continuous RF signal transmission when tags are affixed directly to steel, aluminium or other high conductivity materials.
Typical applications include gas cylinders, computer chassis, metal pallets and industrial gear – all surfaces where a traditional label would get zero readings.
| Parameter | Specification |
|---|---|
| Operating Frequency | UHF 860–960MHz |
| Communication Protocol | EPC Gen2 (ISO 18000-6C) |
| Read Distance | 1–10 meters |
| Storage Capacity | 96-bit / 128-bit / 512-bit EPC; user area optional |
| Ambient Temperature | -40°C to +85°C |
| Protection Rating | IP54 / IP65 / IP67 / IP68 (optional) |
| Material | Special ceramics or engineering plastics with electromagnetic isolation layer |
| Chip Models | Impinj Monza, Alien Higgs, NXP UCODE |
| Installation Methods | Adhesive, screw fixing, riveting, hanging |
| Size | Multiple standard logistics sizes; customization available |
The RFID Anti Metal Tags substrate is composed of special ceramic or engineering plastic and an electromagnetic isolation layer. Ceramic substrates provide dielectric stability and heat resistance across the whole working range of -40°C to +85°C. Engineering plastics provide impact resistance and numerous form factors for plastic housings.
Isolation layer avoids signal interference of the metal base, keeping antenna performance without detuning. Flexible versions with thin ferrite sheets or foam spacers are also available for curved metal surfaces.
Such a mix of materials enables the tag to endure outside weathering, mechanical impact, contact with lubricants, detergents or salt spray. This was confirmed by chemical resistance and thermal cycling tests.

WS RFID relies on Voyantic Tagformance testing equipment to ensure the read range uniformity across various metal grades like aluminium and steel. Each manufacturing batch is subjected to:
Thermal cycling studies of delamination or antenna fracture detection following quick temperature changes
3M industrial adhesives adhesion strength testing 180° peel techniques
Immersion in salt spray, oil and detergent for chemical resistance test
Memory Endurance testing to verify chip write/rewrite integrity
WS RFID has ISO 9001:2015 certification and products comply with RoHS, REACH and POPs environmental requirements.

These tags are effective in settings where normal labels are not:
Supply Chain & Logistics – Complete monitoring of metal pallets, shipping containers and returnable transport items (RTIs). Works with WMS, TMS & ERP systems.
Industrial Asset Management – Track high-pressure gas cylinders, engine blocks and heavy equipment through exterior weathering and impact cycles.
IT Infrastructure & Data Centers – Miniature ceramic anti-metal tags attach server blades and networking devices in high-density metallic racks to perform inventory audits quickly without human scanning.
Manufacturing & Tooling – PCB-based tags on moulds, dies and CNC gear allows scheduling of maintenance and monitoring of use cycle for high-vibration, cutting-fluid situations.
Cold Chain & Outdoor Logistics – IP67/IP68 variants are suitable for marine freight, cold chain storage and outdoor applications where temperature & moisture are continual concerns.

WS RFID may be customised in terms of size, protection level (IP54 to IP68), installation technique, chip type and memory capacity. The minimum order quantity (MOQ) is 500 units, therefore bespoke orders are possible for both pilot projects and for bigger deployments.
Production of functional prototypes in 7 working days. Sample testing in actual logistical scenarios is enabled so you may check performance before full production commitment.
WS RFID integrates with WMS, TMS, ERP and other logistics platforms, and offers software SDKs and remote technical help for system integration.

Deploy RFID Anti Metal Tags throughout your supply chain to decrease human touch points and increase asset visibility:
Faster throughput – Batch reading substitutes manual scanning at incoming and outgoing checkpoints
Reduced manual input – Automated identification reduces down on labour expenses for data acquisition
Better inventory management – Real time location data minimises out-of-stock rates and increases turnover
End-to-end traceability – All asset movements from supplier to client are recorded and accessible
Q: Why can't I use a regular RFID label on a metal surface?
A: Metal conductivity detunes standard RFID antennas. Metal reflects RF energy and creates eddy currents that negate the signal. The spacer layer in products provides the required distance for signal transmission; normal labels lack this spacer layer.
Q: Does tag thickness affect read performance?
A: Yes. Generally, thicker dielectric spacer gives greater electromagnetic isolation and longer read distance. Tag thickness is one of the main design characteristics that is changed in the customisation process.
Q: Can these tags be read through metal?
A: No. The tag should be put on the outside surface with a clear line of sight route to the reader for reliable readings.
Q: What is the optimum mounting for high vibration environments?
A: We suggest using mechanical fasteners like rivets or screws in conjunction with high-bond structural adhesives. Avoid using pressure-sensitive tapes by themselves. These tags are suitable for adhesive, screw fastening, riveting and hanging installation.
Q: Are there flexible versions for curved metal surfaces?
A: Yes. Flexible anti-metal labels with thin ferrite sheets or foam spacers are tailor-made for cylinders and curved containers.
Q: What systems may these tags be integrated with?
A: The tags are compatible with WMS, TMS and ERP systems. WS RFID offers software SDKs and remote integration help to link with your current logistical systems.
Do you have more questions about RFID Anti Metal Tags? Email kenny@w-srfid.com for samples, pricing, or a custom solution consultation.