RFID PVC Wristband
RFID PVC Wristbands from WS RFID are identification devices that can be worn. They have an RFID chip and receiver built into a multi-layer PVC base. For 13.56 MHz HF frequencies and 860–960 MHz UHF frequencies, they work with NXP MIFARE, NTAG, ICODE, and Fudan Microelectronics chip platforms. They are also made to work in wet, high-traffic areas where paper or fabric alternatives fail. This makes a solution that can work for businesses that need to control a lot of people's access, accept payments without cash, or keep an eye on patients.
PVC choice, not just appearance, is what counts in field performance.
These bracelets are manufactured from PVC material that can be tugged over 5kg without breaking. The surface prevents bacterial development and is able to survive repeated alcohol sterilisation - a practical need in healthcare contexts. It is UV resistant and hence the printed picture or text will be legible after extensive exposure to the outdoors.
It’s non-toxic and hypoallergenic material and great for long-term skin contact. In applications like saunas or steam rooms, high-temp resistant PVC formulations keep their structural and chip integrity up to 70 °C. Dependable functioning down to -25°C for cold storage and outdoor winter use.
| Parameter | Details |
|---|---|
| Material | PVC |
| Frequency | 13.56 MHz (HF); 860–960 MHz (UHF) |
| Chip Options | NXP MIFARE, DESFire, NTAG, ICODE, Hitag; Fudan Microelectronics; Huada Electronic |
| Read Range | HF/NFC: 1–5 cm; UHF: 1–3 meters |
| Water Resistance | Basic splash-proof (indoor use); IP68-rated options available |
| Operating Temperature | -25°C to +70°C |
| Colors | Multiple options available |
| Closure Type | Single-use snap or reusable buckle |
| MOQ | 500 units |
| Lead Time | 5–7 days (in stock); 10–12 days (custom orders) |
| Certifications | ISO 9001:2015, CE, FCC, RoHS, REACH, POPs |
The choice of chip determines the amount of data security you obtain as well as the interoperability of the system.
Standard access control and event ticketing are covered by most off-the-shelf readers that are compatible with NXP NTAG or MIFARE Classic chips. For cashless payment applications, MIFARE DESFire chips enable 3DES and AES encryption, which are more resistant to cloning attempts than standard MIFARE choices.
UHF chips at 860–960 MHz are suitable for long-range applications — parking management, logistics, or high-traffic venue entrance — with read distances of 1–3 meters depending on reader power and environment. HF chips at 13.56 MHz are more appropriate for short range tap interactions (1–5 cm) at POS terminals or access gates.
All chip types are compliant with ISO 14443A and ISO 15693 and are compatible with common RFID and NFC readers.

Prior to delivery all manufacturing batches undergo a standardised inspection procedure.
We test all RFID PVC wristbands for chip read/write performance before and after lamination using frequency analysers to identify faults at each step. Tensile strength tests have been carried out on each band to prove that they can endure a pulling force of over 5 kg. Environmental ageing tests confirm performance in harsh outside circumstances, such as salt spray and high-temperature humidity simulation.
Friction tests are conducted to determine printing durability, ensuring logos, QR codes and variable data are still readable after extensive usage. Material biocompatibility is verified to ISO 10993 for skin safety. WS RFID has a fault rate of less than 0.1% on all of its manufacturing lines.

Conferences & Exhibitions: Temporary visitor credentials and entrance permits where tap-and-go admittance helps reduce wait congestion at gates and booths.
Water Parks & Resorts: Splash-proof design accommodates continual water exposure and supports cashless payment and locker access in a single wristband.
Medical Environments: Flat PVC surfaces are easy to clean and prevent bacterial growth, which makes them ideal for use in patient monitoring and medication verification processes.
Festivals & Large Events: Chip encryption makes duplicate tickets impossible. Each RFID PVC wristband is a digital credential that is tamper evident.
Venues and Access Points: Different guest levels may be coloured or encoded for easier multi-level access control in stadiums, hotels or corporate campuses.

WS RFID allows complete customisation of OEM and ODM for customers with special needs.
Custom colours, brand printing, and chip encoding are offered to integrate with your reader infrastructure. Variable data printing is supported (QR codes, sequential numbering or UID printing) in production. Antenna design may be optimised for certain form factors or read-range specifications.
Functional samples are available in 7 working days. There are samples of the existing stocks free of charge; conditions of the samples of the out-of-stock are negotiated. Technical documentation for system integration will be provided upon request.
If you’re shopping around for chip possibilities, or want assistance pairing up wristband specifications to your current reader setup, get in touch with the team prior to ordering.

Q: Is the wristband reusable or single use only?
A: Both are choices. Snap closures, disposable, are suitable for event security, whereas buckle closures, reusable, work well for membership programs or resort settings.
Q: What kind of read range should I expect?
A: HF/NFC wristbands are commonly scanned in 1-5cm. UHF variants get 1-3 meters, depending on reader output power and site circumstances.
Q: Are chip data secured against cloning?
A: MIFARE DESFire chips are encrypted using 3DES or AES. This is a far stronger encryption than ordinary MIFARE and offers better security against cloning. Which chip is suited dependent on your security needs.
Q: Can the wristband endure sauna or steam room conditions?
A: Yep. High-temperature resistant PVC formulations retain structural and chip integrity up to 70 °C.
Q: Are these wristbands suitable with current POS systems?
A: All wristbands are ISO 14443A and ISO 15693 compliant and compatible with most RFID/NFC scanners and POS systems.
Q: What’s the minimum order quantity ?
A: MOQ is 500pcs. Samples of in stock choices are available free of charge before you commit to a complete purchase.
Do you have more questions about RFID PVC Wristband? To request samples, get chip selection guidance, or discuss a custom order, contact the WS RFID team directly at kenny@w-srfid.com.