RFID Tyvek Wristband
Since 2008, the WS RFID has been used to manufacture disposable wristbands. Our RFID Tyvek Wristband with a contactless chip embedded in DuPont Tyvek, a flash-spun high-density polyethylene fibre, provides tap-and-go access control, cashless payments and attendance monitoring in one wristband. It supports 13.56MHz HF/NFC and 860-960MHz UHF frequencies. MOQ is 500 pieces. In-stock lead time is 5-7 days.
Tyvek isn't typical paper. It is made from flash spun high density polyethylene fibres and combines properties that are seldom seen in one sheet material.
Its lightweight, breathable, and pH-neutral material is unlikely to irritate skin, even if worn for extended periods of time. These properties are significant in children's activities, water parks and health care where long term skin contact is routine.
Tyvek is also strong in tensile strength. It won't tear under normal use, it won't degrade when exposed to water or chemicals and it will accept CMYK photos, QR codes and variable UID data with consistent print quality. It is recyclable as Category 2 HDPE, so you have a straightforward way to dispose of high-volume organisers at the conclusion of an event.
| Parameter | Details |
|---|---|
| Material | Tyvek Specialty Paper (DuPont HDPE Fiber) |
| Frequency | 13.56 MHz (HF/NFC) / 860–960 MHz (UHF EPC Gen2) |
| Supported Standards | ISO 14443A, ISO 15693, EPC Gen2 |
| Water Resistance | Fully waterproof; functional after prolonged submersion |
| Usage | Single-use (disposable) |
| Read Range (HF/NFC) | 1–5 cm |
| Read Range (UHF) | 1–3 meters (environment-dependent) |
| Defect Rate | < 0.1% |
| MOQ | 500 units |
| Lead Time | 5–7 days (in-stock); 10–12 days (custom order) |
| Chip Options | NXP Mifare, Desfire, Ntag, UCODE, Hitag; Fudan, Huada, and others |
| Certifications | ISO 9001:2015, CE, FCC, RoHS, REACH, POPs |
Tamper-Evident Security
The adhesive closure is die cut so that any effort to remove it would shred the Tyvek fibres or destroy the RFID antenna. The band is visibly damaged after removal and cannot be replaced without discovery. This design immediately cuts down on ticket fraud and unauthorised re-entry.
RFID Inlay Water-Resistant
The chip and antenna are embedded between layers of Tyvek, or sealed with a protective coating. It stays active even after contact with pools, rain or seas - an important feature for water parks and outdoor gatherings.
One Time Use Economical
With automated manufacturing the per-unit cost of an RFID tag is low enough to allow deployment of single-use RFID practical, even at large scale events. Price is not traded off with performance.
Wide Chip Compatibility
The chips available include NXP Mifare, Desfire, Ntag and UCODE series, Fudan Microelectronics and Huada Electronic. This range makes it easy to link the wristband to your current reader infrastructure.

Music Festivals & Concerts
Tap-and-go entrance caters for big crowd densities without bottlenecks. The waterproof design means the system operates in rain or humidity, and the disposable format allows for an easy cleaning after the event.
Water Parks & Outdoor Things to Do
The RFID inlay still works despite being fully submerged. In addition to cashless payments, guests may connect their wristband to a pre-funded account to pay anywhere around the site without the need to carry cards or cash.
Trade Show & Corporate Conference
The UHF versions include session tracking and automatic lead retrieval. Organisers can easily get attendance data without manual scanning, and the lightweight Tyvek material allows participants to remain comfortable for a full-day agenda.
Exhibitions and Group Tours
Each RFID Tyvek Wristband has a UID associated with the visitor records that allow effective management of entrance zones and possibility to track group movements in a multi-zone event.
Short Term Healthcare & Patient Tracking
Disposable wristband identification links patients to electronic health data with a simple scan in outpatient clinics and emergency triage teams. pH neutral substance, fit for long usage for sensitive skin.

Before being sent, each wristband goes through four checkpoints:

WS RFID RFID Tyvek Wristband may be fully customised for OEM/ODM. You may specify a:
samples within 7 working days functional Get in touch to talk about your project needs.

Q1: Is it possible to transfer the bracelet to another person?
A: No. If the tamper-evident adhesive seal is removed, it will rip the Tyvek material or destroy the RFID antenna.” Undetected transfer is not practicable if the harm is visible.
Q2: Does the RFID chip have water protection?
A: Yes. The inlay is layered with Tyvek or overlaid with a protective coating and continues to work even after extended periods underwater.
Q3: Can each wristband have data?
A: Yes. WS RFID can print changeable data and encode chips, including sequential numbers, QR codes and bespoke UID matching each unit.
Q4: What is the reading distance?
A: HF/NFC variants read at 1-5 cm for close range security. Depending on the reader environment and antenna arrangement, UHF versions may reach 1-3 meters.
Q5: Is Tyvek an eco-friendly material?
A: Tyvek® is recyclable as Category 2 HDPE. Large events - We may talk solutions for disposal programs depending on your needs.
Q6: What kind of chips are there?
A: Available chips include NXP Mifare, Desfire, Ntag, UCODE and Hitag series as well as Fudan Microelectronics and Huada Electronic. Let our specialists assist match the correct chip to your reader system.
Do you have more questions about RFID Tyvek Wristband? To request a sample or discuss an upcoming event, reach our team at kenny@w-srfid.com.