RFID Paper Card Ticket
RFID Paper Card Ticket is composed of a microchip and antenna inlay embedded in the layers of a recyclable speciality paper substrate, usually 300 – 500gsm. The device is working at 13.56MHz HF and is compliant with ISO/IEC 14443 standard which makes it compatible with most of the turnstile readers. ’This device provides a technically sound alternative to barcode tickets and PVC smart cards to transit operators and event organisers who are faced with counterfeiting threats, sluggish entrance throughput or pressure to decrease single-use plastic.
Radio frequency identification makes non-line-of-sight data transfer possible. No alignment necessary - a passenger/attendee just taps the ticket near the reader.
Each RFID Paper Card Ticket has a 7-byte UID with hardware-level encryption, which makes it far harder to duplicate than a barcode that can be duplicated. Operationally, the security difference is substantial at high-volume access points handling thousands of individuals each hour.
The paper substrate is stable within a temperature range of -20°C to +60°C and is bonded using specific adhesives that prevent delamination under bending or torsion stress.
| Parameter | Details |
|---|---|
| Standard Size | CR80 (85.5 × 54mm) or custom sizes available |
| Operating Frequency | 13.56MHz (HF) |
| Communication Protocol | ISO/IEC 14443 |
| Read/Write Distance | 0–10cm |
| Material | Recyclable specialty paper (300–500gsm) |
| Printing Process | Full-color offset printing, screen printing |
| Waterproof Rating | Basic waterproofing |
| Operating Temperature | -20°C to +60°C |
| Storage Capacity | 1KB or 4KB EEPROM (optional) |
| Chip Options | NXP Mifare series, DESFire series, NTAG series, ICODE series, Hitag series, Fudan Microelectronics, Huada Electronics |
The substrate is recyclable speciality paper, replacing PVC for short-term ticketing purposes. This is critical for procurement teams who are operating under green buying requirements of public transportation authority, event venues or government buildings.
This product complies with RoHS and REACH. If your purchase procedure needs documentation, WS RFID can give the required certification documents on request.
For purchasers wishing to eliminate single-use plastic without altering reader infrastructure, paper substrate RFID tickets need no hardware modification on the gate side.

Event branding, full colour artwork, QR codes and serial numbers may be printed right on the surface of the ticket. Supported techniques include changeable data output via offset, screen, thermal transfer and inkjet printing.
Pre-encoding at the chip level available. Tickets may be sent with event relevant info put on them.
Buyers may print proofs and test samples prior to mass production to check the completed ticket before committing to a full production run. WS RFID takes care of antenna design, chip encoding, ticket creation and delivery in one order.

Each chip is automatically tested for read-range consistency to ensure that it meets minimal sensitivity requirements. Inlay frequency response is evaluated using network analysers and resonant frequency is kept within ±300kHz tolerance to guarantee dependable reader coupling.
Pull tests are performed to verify the bonding strength to ensure that the paper layers and chip-antenna interface are holding under bending or twisting. Surface smoothness and ink adherence are also examined to ensure QR codes and serial numbers are printed correctly. Samples are also cycled through temperature and humidity for environmental stress screening.
WS RFID has a goal of a functional yield > 99.7% each manufacturing run and an overall defect rate < 0.5%.

Public Transport: Used by Metro and bus networks as single-trip or short-term passes. Contactless entrance helps ease congestion at the turnstiles during peak times.
Events and Entertainment: Used for tickets and access control at music festivals, concerts, and sports events. The RFID Paper Card Ticket stores encrypted credentials and is resistant to mechanical stress and sweat.
Scenic areas and exhibition halls Typical use cases: Admission control, visitor flow management and booth check-in. Lightweight construction means per ticket expenses are reasonable at scale.
Hospitality & Ski Resorts When used as an environmentally friendly key card or lift pass in high humidity or sub-zero outdoor conditions without the expense of a permanent plastic transponder.

Q: What is the difference between HF and UHF RFID paper tickets?
A: HF (13.56MHz) is aiming at short range applications up to 10cm, e.g. transit gates, exhibition admission. UHF (860-960MHz) is good for extended range tracking and high speed gate access across several meters.
Q: Is it possible to customise tickets using variable data?
A: Yes. Thermal transfer and inkjet printing allows for distinct QR codes, serial numbers and customised visuals on each and every ticket.
Q: How secure is an RFID paper ticket compared to a barcode?
A: Basic equipment can photocopy barcodes , but cards with hardware-level encryption and 7-byte UIDs are more tougher to duplicate without permission .
Q: Can I put these tickets in my regular paper recycling?
A: The substrat is a recyclable speciality paper without PVC plastic. Product with RoHS and REACH certification. Local processing infrastructure determines compatibility with local recycling streams.
Q: What is the normal failure rate?
A: For each manufacturing run, WS RFID aims >99.7% functional yield and overall <0.5% failure rate.
Q: What is the MOQ and lead time?
A: MOQ is 500pcs. goods in stock ship in 5-7 days, goods out of stock ship in 10-12 days. Existing samples are provided free of charge.
Do you have more questions about RFID Paper Card Ticket? For samples or a quote, reach us at kenny@w-srfid.com.