image

NFC Key Fob

NFC Key Fob Tags: A Portable Smart Solution
Operating Frequency: 13.56 MHz; Supports NFC Forum Standards
High-Quality ABS or Silicone Material
Supports Brand Logo Printing and Custom Encoding
Ideal for Access Control, Membership Management, and Smart Home Systems
Standard Delivery Time: 7–10 Days
Product Description

NFC Key Fob — Contactless Credential for Access Control, Membership & Smart Home

The NFC Key Fob is a passive contactless credential that operates at 13.56 MHz and is used for access control, membership management, and smart home applications. Since 2008, WS RFID has been producing NFC hardware, operating from a 10,000+ sqm production facility with an annual output of over 500 million devices. Each fob is manufactured on automated lines and undergoes a five-step quality procedure before it is sent, and it is certified to ISO 9001:2015, CE, FCC, RoHS, and REACH.

What Is an NFC Key Fob?

A product is a small, passive, contactless credential intended to be attached to a keychain. It works at 13.56 MHz and is compliant with the ISO/IEC 14443 and ISO 15693 standards for short-range data transfer with compatible readers and NFC-enabled devices.

It has no moving parts and does not wear out with prolonged usage unlike mechanical keys or magnetic stripe cards. Access rights are handled digitally – if a fob is lost, the UID may be disabled in the access control system without modification to the actual hardware.

Chip Options and Technical Specifications

WS RFID NFC keyfobs are available with NTAG series, MIFARE DESFire and ICODE chips. The chips you choose depend on your target reader system and the amount of data protection you need.

NTAG chips are good for simple things such as accessing a URL or initiating a smart home automation. MIFARE DESFire chips are equipped with 128-bit AES encryption, which makes them ideal for high-security access control and applications where data protection is essential.

All chip variants have up to 10 years data retention and 100,000 write cycles. The anti-collision capability enables a single reader to scan many fobs at the same time, which is advantageous in heavy traffic entry scenarios.

Product Specifications

Parameter Details
Frequency 13.56 MHz
Protocol ISO/IEC 14443 / ISO 15693
Supported Chips NTAG Series, MIFARE DESFire, ICODE
Material ABS / Silicone
Attachment Keyring design
Operating Temperature -20°C to +60°C
Waterproof Rating IP67 / IP68 (varies by material)
Data Retention Up to 10 years
Write Endurance 100,000 cycles
Color Options Multiple colors available
Dimensions Multiple housing options available
Certifications ISO 9001:2015, CE, FCC, RoHS, REACH

Material Options

The ABS housing is robust, lightweight, and inexpensive. It is a suitable alternative for office buildings, business sites and any other indoor access control setting where physical wear is limited.

The silicone casing is flexible and hypoallergenic. This is great for gyms, swimming pools, or any everyday wear situations where it will be in touch with skin or moisture often. Both materials are customisable in logo placement and come in a variety of colours.

The IP67/IP68 waterproof certification is subject to the chosen housing material. Operating temperature range of -20°C to +60°C caters for most indoor and outdoor circumstances of deployment.

application

Application Scenarios

Access Control

NFC key fobs are used for access control in offices, residential complexes and industrial sites. Staff or residents touch their fob against a suitable scanner. If a fob is lost, the UID is centrally disabled without changing locks.

Membership Management

Gyms, clubs and co-working spaces provide NFC fobs to identify members. Just a tap for verification – no manual scanning or physical touch.

Smart Home Systems

You may tap the fob against an NFC-enabled device to perform pre-set automations such as locking doors, initiating lighting sequences or switching device profiles.

Event Management and Cashless Payments

These fobs are your access pass at stadiums and festivals and come pre-loaded with digital wallets. The rugged casing makes it more suited for use in high-traffic areas than ordinary PVC cards.

Digital Link Powers Up

Configure the fob to open a particular URL when tapped. Suitable for product authentication, onboarding processes, and promotional landing pages.

equipment

Quality Control Process

All batches of manufacturing are inspected on five stages before to export.

  • Frequency Consistency Test – Every fob is tested to function at a frequency of 13.56 MHz.
  • Read Range Verification – Performance tested against standard readers between 2-10cm range.
  • Ultrasonic Welding Integrity — Mechanical stress resistance of the housing is shown by torsion and drop tests.
  • Environmental Simulation – Salt spray and UV ageing test for outdoor durability
  • Data Integrity Verification – A batch write/read check confirms no IC failures before shipping.

Muehlbauer bonding lines and Voyantic Tagformance testing systems guarantee a fault rate below 0.1%.

Service Process

Customization and OEM/ODM Services

WS RFID can produce NFC key fobs as a comprehensive OEM/ODM service. Choices include housing colour, material (ABS or Silicone), chip type and encoding content.

Visual identification and inventory monitoring may be accomplished via logo and marking alternatives such as laser engraving, silk screen printing and inkjet numbering. We give you with chip selection recommendations for your target reader system and technical documentation support.

MOQ: 500 PCS

Samples: existing samples are available, arrangements for out-of-stock samples may be negotiated

Lead Time: 5-7 Days (In Stock) / 10-12 Days (Custom Orders)

Warranty: 1 year warranty on all goods

certificate

FAQ

Q1: What is the difference between NTAG and MIFARE DESFire chips?

A: NTAG chips do basic things like accessing a URL or saving a brief text record. MIFARE DESFire chips include 128-bit AES encryption and are intended for use in secure access control or financial transactions that need data security.

Q2: Can the productbe used on or near metal surfaces?

A: Standard fobs are subject to RF interference from metallic objects. To counter this, on-metal variants with a ferrite layer are available but are a different product type.

Q3: How to pick between ABS and Silicone?

A: ABS is rigid and cost efficient for office and commercial applications. Silicone is flexible and hypoallergenic and is used in gyms, pools or applications with frequent skin contact.

Q4: Can a product data be cloned?

A: The static UID fobs give little protection against cloning. The Fobs with MIFARE DESFire chips use 128-bit AES encryption to stop unauthorised replication.

Q5: Do you do custom printing or numbering on the fob?

A: Yes. Identification and tracking are made possible using laser engraving, silk-screen printing and inkjet numbering.

Q6: What’s your sample policy?

A: Samples in stock are free of charge. Sample conditions for out of stock items are negotiable. Tell us about your needs.

Contact Us

For pricing, samples, or technical questions about our NFC key fobs, contact us at kenny@w-srfid.com. We typically respond within one business day.

Drop Us A Line
RFID smart cards, wristbands, and electronic tags for identification, access control, and tracking applications. Contact us with your application, reader details, quantity, and customization requirements to discuss product options and sample availability.
Welcome to contact us anytime for more products contact us