RFID POE Card Reader
WS-E280 is an RFID POE Card Reader for access control, attendance management and campus or industrial entrance applications. Standard support for Mifare® Classic and T=CL CPU card protocols, optional support for Mifare PLUS, Desfire and I-CODE. Powered by DC5V or conventional POE, it communicates over TCP/IP, plugging straight into existing network infrastructure. Housing is ABS, 133mm x 92mm x 28mm. We provide OEM/ODM service for projects that need branding customisation or hardware changes.
The expense and difficulty of running separate power wire to each reader endpoint might be significant, especially in renovated buildings or at locations with limited electrical infrastructure. The WS-E280 draws both power and data over a single Ethernet connection, so there’s no need for separate power circuits at each entrance.
The reader communicates using TCP/IP, thus it may be immediately connected to a normal network switch. There is no need for any proprietary communication bus. This makes it easy to send reader data to an access controller or attendance platform on the same network.
| Parameter | Details |
|---|---|
| Model | WS-E280 |
| Power Supply | DC5V or PoE |
| RFID Frequency / Protocol | 13.56 MHz — Mifare® Classic, T=CL CPU Card |
| Optional Card Support | Mifare PLUS, Desfire, I-CODE |
| Read Range | 1–2 cm |
| Network Interface | TCP/IP (PoE) |
| Housing Material | ABS |
| Dimensions | 133 mm (L) × 92 mm (W) × 28 mm (H) |
| Operating Temperature | 0°C – 60°C |
| Warranty | 1 Year |
The WS-E280 RFID POE Card Reader is a 13.56 MHz reader that supports the most popular card protocols used in business access and identity systems.
Standard support consists of
Optional support:
If your present card infrastructure is using one of the optional protocols, please check the setup required with our staff before ordering.

The WS-E280 is powered and networked via a single Ethernet wire linked to a PoE-enabled switch or injector. This eliminates the need for a separate DC power adapter at each reader site, simplifying wiring in new installations and retrofitting areas.
Communication is done via a network using TCP/IP. During the pre-order stage, we analyse the integration with your access controller or attendance software to ensure the API format, SDK needs and controller compatibility so that the scope of the deployment is clarified prior to production commencement.
DC5V adaptor compatibility for places without PoE infrastructure as well.

The WS-E280 RFID POE Card Reader is suitable for the following deployment types:
All four situations need reliable card reading with centralised data routing via IP – the architecture on which the WS-E280 is based.

WS RFID enables OEM/ODM collaboration for WS-E280. Customisations might include housing colour, logo, firmware changes, form factor changes and more. These are dealt with via direct discussions with the product team.
WS RFID has a manufacturing base of over 10,000 square meters and SMT production lines. MOQ for WS-E280 is 500 pcs and above. Existing stock samples are available – please contact the team to discuss your project needs and availability.

WS RFID is ISO 9001:2015 Certified. The WS-E280 is intended to fulfil CE, FCC, RoHS, REACH and POPs compliance standards.
The reader comes with a one year product warranty. The WS RFID staff is here to help you after you buy with technical support, SDK help and remote integration assistance.
Q: Does the WS-E280 require a separate power supply?
A: If your network switch supports PoE (IEEE 802.3af/at), the reader draws power through the Ethernet cable and no separate adapter is needed. A DC5V adapter is also supported if PoE is unavailable at a given location.
Q: Which card types does the WS-E280 read?
A: Mifare® Classic and T=CL CPU cards are supported as standard. Mifare PLUS, Desfire, and I-CODE are available as optional configurations. Confirm your card type with the team before ordering to ensure the correct build.
Q: What is the read range?
A: The read range is 1–2 cm. This is consistent with 13.56 MHz contactless smart card readers and reduces the likelihood of unintended reads in environments where multiple cards are in proximity.
Q: Can the WS-E280 integrate with third-party access control software?
A: The reader communicates over TCP/IP. Compatibility with your specific controller or software platform is reviewed during the pre-order stage. Contact the team with your system details to confirm fit before ordering.
Q: What is the minimum order quantity?
A: MOQ is 500 units. Contact the team to ask about sample availability and current lead times for your order size.
Q: Is OEM/ODM available?
A: Yes. WS RFID supports OEM/ODM for the WS-E280, including custom branding, housing modifications, and firmware-level changes. Reach out to discuss your project scope.
Do you have more questions about RFID POE Card Reader? For product inquiries or OEM/ODM discussions, contact us at kenny@w-srfid.com.