RFID FPC Mini Tag
The RFID FPC Mini Tag is based on a polyimide (PI) flexible printed circuit substrate, providing RFID identification in as tiny as 3×3mm diameters and 0.3-0.5mm thickness. It runs at 13.56MHz (HF) or 860-960MHz (UHF) and supports ISO/IEC 14443 and EPC Gen2 protocols It is RoHS and REACH approved. It is targeted to electronics, medical equipment, jewellery and industrial instruments for applications where stiff tags cannot physically fit or survive the manufacturing process.
PET is a common substrate used to make most conventional RFID tags. PET is stiff and heat sensitive. The RFID FPC Mini Tag instead employs polyimide, a material that is well suited for high density circuit etching and thermal stability across a broader range of manufacturing conditions.
Tags based on PET often fail in industrial situations where SMT reflow or injection moulding takes place. The polyimide substrate can withstand temperatures up to 220°C for limited periods of time, which covers the range of heat exposure typical in injection moulding cycles.
This flexible structure also enables the tag to bend and flex numerous times with no circuit damage. This means no more inflexible tag solutions for curved surfaces, wearables or tight mechanical areas.
| Parameter | Details |
|---|---|
| Operating Frequency | HF 13.56MHz / UHF 860–960MHz |
| Communication Protocol | ISO/IEC 14443 / EPC Gen2 |
| Chip Model | NXP NTAG series / Impinj Monza series |
| Size Range | 3×3mm to 10×10mm |
| Thickness | 0.3–0.5mm |
| Material | Flexible FPC (Polyimide substrate) |
| Reading Distance | 0–3cm (HF) / 0–10cm (UHF) |
| Operating Temperature | -25°C to +70°C |
| Mounting Method | Soldering or adhesive bonding |
| Certifications | RoHS, REACH |
Compact form factor The 3×3mm size makes it suitable for use in tight locations like ring settings, earphone housings and tiny medical devices where conventional RFID tags cannot be installed.
Flexible base The FPC architecture allows mounting on curved or uneven surfaces. The polyimide foundation resists cracking and delamination under repetitive flexing.
Choices of dual frequency. HF (13.56MHz) is suited for short-range, access-control or authentication applications. UHF (860-960MHz) enables asset tracking over vast distances. It is contingent upon your reader infrastructure and the read distance you need.
Etched copper antenna The etched copper design offers a better Q-factor, and a more consistent RF performance from batch to batch in manufacturing as compared to silver-ink printed antennas.
DPP compatible. The tags are compatible with Digital Product Passport data models, which are crucial for firms intending to comply with EU product sustainability and traceability regulations.

Electronics and Wearables
TWS earbuds, smartwatches and Bluetooth headsets have precise internal geometries. The tag may be implanted inside curved housings for lifetime tracking and asset management without impacting device assembly.
Jewellery & Luxury Goods
This thing is tiny enough to be embedded in a ring setting or watch strap for authentication and retail inventory reasons without visibly altering the product.
Medical Equipment
These tags have been tested under Gamma radiation and Ethylene Oxide (EtO) sterilisation settings, providing a means to trace surgical equipment and dentistry tools during sterilisation processes.
IT assets and industrial equipment
Automatically track miniature IT appliances and small power equipment. The tag exhibits consistent RF performance under vibration and tight mechanical enclosures.
Textile & Apparel
The RFID FPC Mini Tag is integrated into garment hang tags or shoe labels when thinness and low profile are required without adding bulk to the final product.

WS RFID uses Voyantic Tagformance equipment for RF consistency testing on each manufacturing batch to check the read range and resonance frequency. COB shear tests prove chip bonding under mechanical force. Automated optical inspection (AOI) examines etching precision, ensuring antenna shape is within the tolerances needed for steady signal output.
Tags also undergo environmental stress screening – 168 hours at 85°C/85% relative humidity and thermal shock cycles – before the delivery.

WS RFID allows bespoke sizes from 3×3mm up, irregular forms and HF/UHF variants. Antenna geometry may be customised to your application for form factors.
Samples are subject to stock availability. Sample conditions are negotiable for bespoke samples, however current designs are free of charge. MOQ: 500pcs. Lead time is 5-7 days for in-stock goods and 10-12 days for bespoke orders.
Technical support includes software SDKs, help with installation and remote integration assistance from prototype to production.

Q: Does the tag withstand plastic injection moulding at high temperature?
A: The polyimide substrate and gold-bump flip-chip bonding enables the tag to survive the 200C+ temperature range of the injection moulding cycles.
Q: Does the modest size of the antenna effect the reading distance?
A: Less read range due to smaller antenna. The etched copper antenna design gives maximum energy transmission under certain conditions. The typical range for HF is 2-10 mm, whereas for UHF it may be up to 1 metre, depending on the reader output power and the surroundings.
Q: Are these tags mountable on metal surfaces?
A: Yes. To adjust the tag for on-metal applications, a thin ferrite absorber layer was added to the tag.
Q: Will these tags survive medical sterilisation?
A: They have been tested under Gamma radiation and Ethylene Oxide (EtO) sterilisation settings. You must confirm that your regulatory and procedural requirements are suitable for particular medical applications.
Q: What are the customisation options?
A: Options include bespoke sizes (down to 3×3mm), unusual forms, chip model selection (NXP NTAG or Impinj Monza), and mounting technique (soldering or adhesive bonding).
Do you have more questions about RFID FPC Mini Tag? Send your project details or sample request to kenny@w-srfid.com.